Body, Add-on Parts & Accessories for Dodge Durango

Basics: Choosing body parts for the Dodge Durango correctly

For the Dodge Durango, the correct selection of body parts, add-on parts and accessories is crucial so that fit, appearance and function are right. Model years, facelifts and equipment variants influence which parts fit. Therefore always check the information in the vehicle documents before ordering and match it with the vehicle search in the shop.

In the category Karosserie-, Anbauteile & Zubehör you will find specific components for the Dodge Durango, from bumpers to hoods to side skirts and spoilers. The following sections give you an overview of what to pay attention to when selecting, fitting and installing parts.

Bumpers and diffuser on the Dodge Durango

Front bumper: structure and specifics

The front bumper of the Dodge Durango supports the grille, daytime running lights (DRL), parking sensors, possibly radar/assistance systems, as well as air ducts to the engine bay and brakes. When replacing it, the new bumper must have all intended mounting points and cutouts.

An example is the Complete front bumper with DRL for Dodge Durango 2014–2024 in SRT style. Stylistic modifications are possible here, but the technical interfaces (mounts, sensor openings, air guidance) must match the vehicle.

Notes on removal and installation of the front bumper

• Disconnect the battery: Before working on electrical components (DRL, PDC, radar) disconnect the battery according to the vehicle documentation.
• Release covers: Remove wheel arch liners, undertray and, if applicable, the upper cover in front of the radiator. Sort fastening elements (clips, screws) carefully.
• Mark connectors: Mark or photograph all electrical plugs (sensors, DRL, fog lights) to avoid mix-ups.
• Remove bumper with two people: The bumper is bulky; remove it with a second person to avoid paint damage.
• Transfer add-on parts: Transfer grilles, sensor mounts, covers and sealing profiles from the old to the new bumper, unless included in the delivery.

Torque specifications for carriers and reinforcements should be taken exclusively from the workshop manual or the manufacturer's information.

Rear bumper and rear diffuser

The rear bumper on the Dodge Durango houses parking sensors (PDC), license plate lighting and often also the rear diffuser.

An example is the Complete rear bumper for Dodge Durango 2014–2024 SRT style with PDC. Check whether your vehicle has parking sensors and whether the configuration of the new bumper matches that.

For a visual enhancement, a separate diffuser such as the rear diffuser for Dodge Durango 2014–2023 in matte black can be used additionally. Check the fastening method (clips, screws, additional brackets) and whether cutouts for the exhaust system or tow hitch need to be taken into account.

Fenders, side panels and fuel filler cap

Front fenders: replacement after accident or rust

Front fenders are often affected by parking dents, accident damage or corrosion. For the Dodge Durango there are vehicle-specific sheet metal parts, e.g. the front right fender and the front left fender.

Important points when replacing a fender:

• Check panel gaps: Adjust the transitions to the hood, bumper and door before finally tightening the screws.
• Corrosion protection: Treat cut edges, drilled holes and contact surfaces with suitable corrosion protection products, especially at edges and in the wheel arch area.
• Wheel arch liners and clips: Carefully release existing fastening clips; replace damaged clips, otherwise they can cause noises and vibrations.

For more parts in this area see the category Fenders, side panels & fuel filler cap.

Hood and front area

Aluminum hood: weight and fit

An aluminum hood reduces weight compared to steel and makes handling easier, especially on the large Dodge Durango. An example is the aluminum hood for Dodge Durango 2014–2024 in 2021+ style.

When replacing the hood the following points are important:

• Secure support: Never remove a hood alone, as size and leverage are high. Always work with two people.
• Mark hinges: Mark the position of the old hood on the hinges with a marker to have a baseline setting for the new hood.
• Adjust hood latch: Check the secondary catch and latch for a smooth but secure closing action. If necessary, adjust the bump stops in height and retention force.
• Check gas struts: If the gas struts are old or weak, check whether they suit a lighter or heavier hood and replace them if necessary according to documentation.

Torque values for hinges and latch should be taken from workshop literature to avoid hood distortion.

Grille and front accessories

Front and radiator grilles strongly shape the appearance of the Dodge Durango. When selecting, it is important whether additional sensors or cameras are integrated. In the category Front & radiator grilles you will find matching components.

During installation be sure that air ducts to the radiator and any auxiliary coolers (oil, transmission) are not impaired. Wiring harnesses and sensor cables must be routed slack-free and kept away from hot or moving parts.

Side skirts, spoilers and aerodynamic parts

Side skirts: appearance and sill protection

Side skirts serve not only appearance but also protect the lower door areas and the rocker edge. For the Dodge Durango there are, for example, side skirts 2014–2023 in SRT Hellcat 2021+ style.

When installing note the following:

• Clean contact surfaces: Clean areas where bonding or screwing will take place to be free of grease.
• Drill only if necessary: If drilling is required for additional fastenings, plan corrosion protection in advance and only drill where the instructions explicitly allow.
• Ground clearance: After installation check the ground clearance, especially with lowered suspension or off-road use.

Alternatively, see the category Side skirts for other variants and looks.

Rear spoiler and roof spoiler

Spoilers at the rear of the Dodge Durango primarily affect appearance and airflow. An example is the rear spoiler / roof spoiler for Dodge Durango in SRT 21+ style.

Possible fastening methods:

• Bonded: High-quality body adhesive tape or body adhesive; substrate must be clean, dry and degreased. Observe curing times of the adhesive.
• Screwed: Requires drilling; exact positioning according to drill template or installation instructions. Deburr drill holes and protect against corrosion.
• Combination: Adhesive and screws are often combined to achieve a permanent fixation.

Make sure the tailgate still opens without contacting the roof or spoiler and that any seals are not pinched.

Fit, material and preparation before painting

Material types and their specifics

• Steel sheet: Strong, easy to weld, but susceptible to corrosion if the paint system is damaged. Careful priming and sealing necessary.
• Aluminum: Light and corrosion-resistant, but more sensitive to deformation. Use different techniques for straightening and panel beating than for steel.
• Plastic / GRP / ABS: Common for bumpers, diffusers and spoilers. Stress-free installation is important to avoid cracks. Use only paintable surfaces.

Trial fitting raw parts (dry fit)

Before a part for the Dodge Durango is painted, a dry fit should always be performed:

1. Hold the part against the vehicle unbonded and unpainted.
2. Check all fastening points, identify necessary cutouts or rework.
3. Check panel gaps to adjacent components and adjust if necessary.
4. Only after a successful trial fit hand the part to the painter.

This way you avoid rework on the freshly painted part and reduce the risk of paint damage from subsequent adjustments.

Electrical and sensor systems: what to watch for during conversion?

Modern Dodge Durango models have various assistance systems whose components are housed in bumpers, grilles or mirrors. When modifying or replacing body parts the following applies:

• Sensor cutouts: New parts must have appropriate openings and mounts for ultrasonic, radar or camera sensors.
• Cable routing: Do not route cables under tension, do not kink them and protect them from heat (exhaust) and moving parts (steering, suspension).
• Tightness: Seal all penetrations into the interior or cavities again with the prescribed seals to prevent water ingress.
• System test: After completion of the work check functions of PDC, DRL, indicators, license plate lighting and, if applicable, camera. Read out fault memory with a suitable diagnostic tool if warning messages appear.

Practical tips for DIY mechanics on the Dodge Durango

• Use documentation: For all safety-relevant components (airbag sensors, seatbelt anchors, bumper carrier) always follow the vehicle manufacturer's documentation.
• Original fasteners: Use original clips, screws and brackets where possible. Replace bent or heavily corroded parts.
• Underbody protection and cavity sealing: After working on sheet metal parts renew damaged protective coatings, especially in the rocker and wheel arch areas.
• Test drive: After major modifications carry out a short test drive, listen for rattles, vibrations and unusual wind noise.

Frequently asked questions

Do all Durango body parts fit all model years?

No. For the Dodge Durango body parts differ by model year, facelift and equipment. Always compare the shop information with your vehicle documents and check whether, for example, parking sensors, cameras or special equipment variants are taken into account.

Can I replace the bumper or hood without a professional workshop?

This is basically possible if you have solid DIY experience, suitable tools and an appropriate working environment. Follow the vehicle documentation exactly, especially for parts with sensors or safety-relevant functions. If in doubt, support from a professional workshop is advisable.

Do new body parts always have to be painted?

Many replacement parts are delivered primed or in raw form and still need to be painted. Some plastic parts like diffusers or spoilers can, depending on the surface, also be installed unpainted. Check the manufacturer's information before installation and coordinate with your painter if in doubt.